Multi Cupla MALC-HSP

Cliquer ici pour avoir une offre individuelle

Telechargement en PDF

(380.18 KB)

A single operation makes simultaneous connections for multiple lines that have a variety of different fluids and sizes. A special design minimizes air admixture in fluid lines upon connection.

Compared with conventional Multi Cuplas, approximately double flow rates are realized. This could reduce the size of required plates. (Rate of flow increase depends on Cupla sizes.)
The MALC type realizes a 2mm axial eccentricity allowance, while the conventional Multi Cupla is only 0.6mm.
Special valve design enables connection of socket and plug under dynamic pressure of up to 8MPa.
When connected, the distance between the socket plate and plug plate is designed to be 30mm for all sizes. This means any size of Cupla can be mounted and used on the same plate.
Airless structure valves prevent outflow of fluid and admixture of air into the fluid line.
Autocatalytic Nickel-Phosphorus coating is adopted for surface treatment over special steel body and internal parts. This coating is environment-friendly.

Spécifications

Movie produit:
Applications:	Huile hydraulique
Pression de travail:	50 bar
Structure de la valve:	Double sens avec valve anti-retour (Non-Spill)
Matière du corps:	Acier
Matière pour l’étanchéité:	FKM
Taille:	1/4" / 3/8" / 1/2" / 3/4"

Pression

Structure de la valve

Applications

topへ

Contactez Nitto Kohki Germany

NITTO KOHKI EUROPE GMBH
Gottlieb-Daimler-Str. 10
71144 Steinenbronn
Germany
Telephone:+49 (0)7157 989 555-0

Contactez Nitto Kohki UK

NITTO KOHKI EUROPE GMBH UK BRANCH
Unit A5, Langham Park, Maple Road
Castle Donington, Derbyshire
DE74 2UT
United Kingdom
Telephone: +44 (0)1332 653 800
Telefax: +44 (0)1332 987 273