| Starting Method: | Push Start |
| Free Speed: | 210 - 650 min -1 |
| Torque: | 2.0 - 7.0 Nm |
| Screw Size (Machine Screw): | 4.0 - 6.0 mm |
| Screw Size (Tapping Screw): | 4.5 - 8.0 mm |
| Mass (Weight): | 630 g |
| Voltage: | 24 V DC |
| Power Consumption: | Approx. 44 W (rotating) |
| DCC0241X-AZ | |
| Input Voltage: | 100-240 V AC, 50/60 Hz |
| Count Function: | Tracks screws fastened Workpiece detector can be incorporated |
| External Start up Control Function: | Start up control can be enabled by external input signal |
| Input Signal Method: | Photocoupler input (24 V DC drive (5 mA/1 input), NPN/PNP switchable) |
| Output Signal Method: | Photocoupler output (30 V DC or less, 30 mA/1 output or less, NPN/PNP switchable) |
| Service Power Source: | 24 V DC (Maximum capacity 200 mA) |
| Serial Signal Method: | RS-232C |
| ESD (Electrostatic Discharge) Protection: | Adopted (IEC61340-5-1 compliant) |
| Mass: | 1,8 kg |
| Power Cord (Optional): | DLW9220 / DLW9240 / DLW9250 |